Journal of Engineering Sciences

Author(s): Moiseev V.¹, Мanoilo E.¹, Hrubnik A.^1*, Vasyliev M.¹, Davydov D.¹

Affilation(s):
¹National Technical University “Kharkiv Polytechnic Institute”, 2 Kyrpychova St., 61002, Kharkiv, Ukraine

^*Corresponding Author’s Address: [email protected]

Issue: Volume 4; Issue 2 (2017)

Dates:
Paper received: October 30, 2017
The final version of the paper received: November 25, 2017
Paper accepted online: November 27, 2017

Citation:
Moiseev V., Мanoilo E., Hrubnik A., Vasyliev M., Davydov D. (2017). Cleaning and disposal of gas emissions from the production of calcinated soda ash. Journal of Engineering Sciences, Vol. 4(2), pp. B1-B6, doi: 10.21272/jes.2017.4(2).b1

DOI: 10.21272/jes.2017.4(2).b1

Research Area: Investigation of Operating Processes in Machines and Devices

Abstract: The article is devoted to the issues of reducing the negative impact on the environment of the production of soda ash, which is achieved by reducing the formation of gas and dust emissions, as well as their deeper cleaning. The problem of cleaning gas emissions from the production of soda ash is solved by using hollow vortex devices, their comparison with operating apparatus is given. The advantages of multi-stage vortex-type apparatuses for cleaning large volumes of industrial gas emissions are noted. The article states that the task of cleaning of industrial gas emissions is significantly complicated by their large volumes, which makes it difficult to use traditional treatment equipment. Most of the devices currently used to clean gases from gaseous, liquid and solid impurities are characterized by low throughput due to small maximum permissible gas velocities in the apparatus. The necessity of using multistage vortex devices for cleaning gas emissions from ammonia and soda dust is substantiated. The advantages of the apparatus of this group are noted – low hydraulic resistance, high efficiency and low energy and metal capacity. The comparison of vortex devices with other active gas cleaning devices according to fractional efficiency is given. The scheme of purification of gas emissions from soda dust, with its further utilization, is proposed. The efficiency of submicron particle deposition in a vortex apparatus with intensive phase interaction may exceed 95 %.

Keywords: industrial gas emissions, cleaning, mass transfer, vortex apparatus, investigation of cleaning processes, ammonia, soda ash dust.

References:

1. Issledovaniye problem razrabotki, vnedreniya i razvitiya tekhnologiy kompleksnoy zashchity cheloveka pri chrezvychaynykh situatsiyakh. FGU VNII GOChS, Мoscow, 2007, pp. 166 [in Russian].
2. Tkach, G. A., Shaporev, V. P., & Titov, V. M. (1998). Proizvodstvo sody po malootkhodnoy tekhnologii. KHGPU, Kharkiv [in Russian].
3. Proceedings of the International Conference “World soda ash”. Riviera, 2007.
4. Sabitov, S. S., Savel’yev, P. I., et al. (1981). Vikhrevyye massoobmennyye apparaty. Obshcheotraslevyye voprosy razvitiya khimicheskoy promyshlennosti, Moscow, NIITEKhIM, Issue 3 [in Russian].
5. Nikolayev, L. N., Ovchinnikov, A. A., & Nikolayev P. A. (1992). Vysokoeffektivnyye vikhrevyye apparaty dlya kompleksnoy ochistki bol’shikh obyomov promyshlennykh gazovykh vybrosov. Khimicheskaya promyshlennost’, No. 9, pp.36–38 [in Russian].
6. Moiseev, V. F., Manoylo, E. V., & Hrubnik A. O. (2015). Intensyfikatsiya promyvacha hazu kolon u vyrobnytstvi kal’tsynovanoyi sody. Tekhnologicheskiy audit i rezervy proizvodstva, Kharkiv: Tekhnolohichnyy Tsentr, No. 6/4 (26) [in Ukrainian].
7. Moiseev, V. F., Manoylo, E. V., & Hrubnik A. O. (2016). The decrease in technogenic load on the environment during the process of absorption of ammonia in soda industry. Journal of Engineering Sciences, Vol. 3, Issue 2, pp. G1–G7.
8. Krasheninnikov, S. A. (1985). Tekhnologiya kal’tsinirovannoy sody i ochishchennogo bikarbonata natriya. Vysshaya shkola, Moscow [in Russian].

Full Text