Journal of Engineering Sciences

Author(s): Skidin I. E.¹, Kalinin V. T.², Tkach V. V.¹, Saitkhareiev L. N.¹, Zhbanova O. M.^1*

Affilation(s):
¹Kryvyi Rih National University,11 Matusevycha St., 50027, Kryvyi Rih, Ukraine
²National Metallurgical Academy of Ukraine, 4 Gagarina Av., 49600, Dnipro, Ukraine

^*Corresponding Author’s Address: [email protected]

Issue: Volume 4; Issue 2 (2017)

Dates:
Paper received: September 20, 2017
The final version of the paper received: November 20, 2017
Paper accepted online: November 27, 2017

Citation:
Skidin I. E. Alternative technology to manufacture bimetallic products by using self-propagating high temperature synthesis / I. E. Skidin, V. T. Kalinin, V. V. Tkach, L. N. Saitkhareiev, O. M. Zhbanova // Journal of Engineering Sciences. —  Sumy : Sumy State University, 2017. — Volume 4, Issue 2. — P. B7-B10.

DOI: 10.21272/jes.2017.4(2).b7

Research Area: Investigation of Operating Processes in Machines and Devices

Abstract: Electric welding is usually used for surfacing metal products. This process may be laborious and timeconsuming, which at the same time excludes welding jointing throughout the product surface. The productivity of powder tape surfacing is pretty low, up to 2.7 kg / h, with a melting rate of 13-15 min / h. The use of the selfpropagating high-temperature synthesis for producing a liquid thermite alloy aimed at further surfacing throughout the metal surface of a detail can provide a cost-effective and viable alternative technology for manufacturing bimetallic products.

Keywords: high-temperature synthesis, termite, surfacing, bimetal, charge, technology, welding, thermocouple, temperature, mould, alternative resource.

References:

1. Kuzmenko, G. V. (2012). New technology of electric arc welding by the rails in the conditions of tram and crane ways. Automatic welding, No. 5, 40–45.
2. Kostiuk, M. D., Kozak, V. V., & Yakovliev, V. O. (2010). Construction and reconstruction of the railway tracks in Ukraine to increase the throughput and introduction of high-speed trains. IES after Ye. O. Paton, Kyiv, pp. 216.
3. Karpushchenko, N. I., Klinov, S. I., Putria, N. N., & Smirnov, M. P. (1999). Railway track. Transport, Moscow, pp. 405.
4. Lonsdale, C. P. (1999). Thermit rail welding: history, process developments, current prac-tices and outlook for the 21st century. Proc. of the AREMA 1999 annual сonf., The American railway engineering and maintenance-of-way association, pp. 2–5. DOI: 10.12691/materials-5-1-2.
5. Okumura, M., Karimine, K., Uchino, K., & Yurioka, N. (1995). Development of field fusion welding technology for railroad rails. Nippon Steel Techn. Rept., Vol. 65, No. 4, 41–49.

Full Text