Issue 2 (2019) | Journal of Engineering Sciences

Issue 2 (2019)

CONTENTS (onlinefirst, in progress)

MANUFACTURING ENGINEERING  
   
Machines and Tools  
   
Lishchenko N. V., Larshin V. P., Krachunov H.  
Simplified Grinding Temperature Model Study A 1-A 7
doi: 10.21272/jes.2019.6(2).a1  
   
Technical Regulations and Metrological Support  
   
Islam M. R., Kalevela S. A., Rivera J. A., Rashid T. B.  
Dynamic Modulus and Field Performance of
Cold-in-Place Recycled Asphalt Pavement
B 1-B 7
doi: 10.21272/jes.2019.6(2).b1  
   
Materials Science C
   
Shameran J. S., Sewgil S. A., Awara Kh. S.  
Biosynthesis of Silver Nanoparticles Extracted Using Proteus C 1-C5
doi: 10.21272/jes.2019.6(2).c1  
   
Berladir K. V., Hovorun T. P., Bondarenko M. O., Vorobiov S. I.  
Application of Reinforcing Thermocycling Treatment
for Materials of Stamps Hot Deformation
C 6-C 11
doi: 10.21272/jes.2019.6(2).c2  
   
Dynamics and Strength of Machines D
   
Altaf S., Mehmood M. S., Soomro M. W.  
Advancement of Fault Diagnosis and Detection Process
in the Industrial Machine Environment
D 1-D 8
doi: 10.21272/jes.2019.6(2).d1  
   
Kumar M. D., Teja P. S., Krishna R., Sreenivasan M.  
Design Optimisation and Simulation Analysis of Formula
SAE Frame Using Chromoly Steel
D 9-D 16
doi: 10.21272/jes.2019.6(2).d2  
   
Verbovyi A., Sieryk, M., Vashyst B., Pavlenko V., 
Simonovskyi, V., Neamtu C., Pavlenko, I.
 
Vibration Reliability of Turbopump Units Considering the Stiffness
of Splined Joints
D 17-D 23 
doi: 10.21272/jes.2019.6(2).d3  
   
MECHANICAL ENGINEERING  
   
Computational Mechanics E
   
Petinrin M. O., Towoju O. A., Ajiboye S. A., Zebulun O. E.  
Numerical Study of the Effect of Changing Tube Pitches on Heat
and Flow Characteristics from Tube Bundles in Cross Flow
E 1-E 10
doi: 10.21272/jes.2019.6(2).e1  
   
Towoju O. A.  
Braking Pattern Impact on Brake Fade in an Automobile Brake System E 11-E 16
doi: 10.21272/jes.2019.6(2).e2  
   
Vanyeyev S. M., Miroshnichenko D. V., Rodymchenko T. S.,
Protsenko M., Smolenko D. V.
 
Data Measuring System for Torque Measurement on Running Shafts
Based on a Non-Contact Torsional Dynamometer
E 17-E 23
doi: 10.21272/jes.2019.6(2).e3  
   
Akimov O. V., Marchenko A. P., Alyokhin V. I., Soloshenko V.,
Shinsky O. Y., Klymenko S. I., Kostyk K. O.
 
Computer Engineering and Design of Cast Parts
for Internal Combustion Engine Crankcase
E 24-E 30
doi: 10.21272/jes.2019.6(2).e4  
   
Yavtushenko A. V., Protsenko V. M., Bondarenko Y. V.,
Kirichenko A. G., Ping F. Y.
 
Numerical Experiment for the Calculation of Normal Contact Stress
in the Deformation Center when Rolling a Metal Strip
E 31-E 35
doi: 10.21272/jes.2019.6(2).e5  
   
Teja P. S., Kumar M. D., Krishna R., Sreenivasan M.  
Simulation and Optimization Studies on Ring Rolling Process
Using Steel and Aluminum Alloys
E 36-E 43
doi: 10.21272/jes.2019.6(2).e6  
   
CHEMICAL ENGINEERING  
   
Processes in Machines and Devices F
   
Pawar P., Kumar A., Ballav R.  
Analysis of Machined Depth and Hole Diameter on Soda-lime Glass
Using Electrochemical Discharge Machining Process
F 1-F 7
doi: 10.21272/jes.2019.6(2).f1  
   
Aluvihara S., Premachandra J. K.  
General Features of the Metallic Corrosion in Raw Crude Oils F 8-F 14
doi: 10.21272/jes.2019.6(2).f2  
   
Govardhan K., Narender G., Sarma G. S.  
Numerical Simulation of Viscous Dissipation and Chemical Reaction
in MHD of Nanofluid
F 15-F 23
doi: 10.21272/jes.2019.6(2).f3  
   
Huliienko S. V., Protsiuk O. O., Gatilov K. O., Kaminskyi V. S.  
The Estimation of Feed Solution Composition Influence on Concentration
Polarization Layer Resistance during Reverse Osmosis
F 24-F 29
doi: 10.21272/jes.2019.6(2).f4  
   
Environmental Protection H
   
Chernysh Y., Plyatsuk L., Ablieieva I., Yakhnenko E.,
Roubik H., Miakaieva H., Bataltsev E., Lis D.
 
Ecologically Safe Directions of the Low Rank Coal Bioconversion H 1-H 10
doi: 10.21272/jes.2019.6(2).h1  
   


© 2014-2019 Sumy State University.
Scientific journal "Journal of Engineering Sciences"
ISSN 2312-2498 (Print), ISSN 2414-9381 (Online).
All rights reserved.