| Machines and Tools | |
| |
| Petrakov Y. V., Ohrimenko O. A., Sapon S. P., Sikailo M. O., Fedorynenko D. Y. | |
| Determination of chatter-free cutting mode in end milling | A1-A11 |
| DOI: 10.21272/jes.2024.11(2).a1 | |
| |
| Babu J., Ramana M. V., Vivek D., Reddy C. H. S. | |
Simultaneous optimization of delamination and thrust force during drilling of GFRP
laminate with a core drill by E-PIV method | A12-A21 |
| DOI: 10.21272/jes.2024.11(2).a2 | |
| |
| Kurhan V., Sydorenko I., Kurgan V., Dudko R., Bershak S. | |
| Optimal layout of the head drive for a self-supporting bucket elevator of high productivity | A22-A29 |
| DOI: 10.21272/jes.2024.11(2).a3 | |
| |
| Shaik H. S. | |
Kinematic analysis of 3-PRPPS spatial parallel manipulator with circularly guided base
for singularity-free robotic motions | A30-A39 |
| DOI: 10.21272/jes.2024.11(2).a4 | |
| |
| Balytska N. O., Prylypko O. I., Hlembotska L. Y., Shadura V. A., Moskvin P. P. | |
| Peculiarities of implementing multifractal analysis of the milled surfaces microrelief | A40-A51 |
| DOI: 10.21272/jes.2024.11(2).a5 | |
| |
| Materials Science | |
| |
| Veeranaath V., Dinesh S. G., Natarajan G. | C1-C12 |
Multi-performance optimization of the mechanical characteristics of basalt fiber
and silicon carbide-filled aluminum matrix composites | |
| DOI: 10.21272/jes.2024.11(2).c1 | |
| |
| Jandieri G., Sakhvadze D. | |
Controlled synthesis of TiB2-TiC composite: Substantiation of the homogenizing Joule thermostatting efficiency
and improvement of SHS-compaction technology in a vacuum | C13-C28 |
| DOI: 10.21272/jes.2024.11(2).c2 | |
| |
| Porselvan R., Lakshmi T. S., Tholkapiyan M. | |
| Durability and FTIR characteristics of sustainable bacterial concrete with mineral admixtures | C29-C41 |
| DOI: 10.21272/jes.2024.11(2).c3 | |
| |
| Cioroagă B. D., Cioată V. G., Socalici A. V., Linul E., Hulka I., Anghel I. M. | |
Optimization of submerged arc welding through voltage variation to achieve
superior mechanical properties using P355N base material | C42-C56 |
| DOI: 10.21272/jes.2024.11(2).c4 | |
| |
| Dynamics and Strength of Machines | |
| |
| Jayaraj M., Ashok S. K., Thirumurugan R, Shanmugam D., Mahendran M. | |
| Mechanical properties and stress analysis of natural fiber reinforced polymer composite spur gear | D1-D8 |
| DOI: 10.21272/jes.2024.11(2).d1 | |
| |
| Computational Mechanics | |
| |
| Dovbysh A. S., Piatachenko V. Y., Myronenko M. I., Suprunenko M. K., Simonovskiy J. V. | |
| Hierarchical information-extreme machine learning of hand prosthesis control system based on decursive data structure | E1-E8 |
| DOI: 10.21272/jes.2024.11(2).e1 | |
| |
| Processes in Machines and Devices | |
| |
| Hu W. J., Shorinov O. | |
| Optimization of technological parameters for cold spraying using the response surface method | F1-F8 |
| DOI: 10.21272/jes.2024.11(2).f1 | |
| |
| Ivashchuk O. S., Atamanyuk V. M., Chyzhovych R. A. | |
| Efficiency investigation of coffee production waste drying by filtration method | F9-F16 |
| DOI: 10.21272/jes.2024.11(2).f2 | |
| |
| Kondus V., Ciszak O., Zhukov A., Mushtai M., Polkovnychenko V., Krugliak A. | |
| Development of a self-cleaning mechanism for torque-flow pumps | F17-F26 |
| DOI: 10.21272/jes.2024.11(2).f3 | |
| |
| Energy Efficient Technologies | |
| |
| Sharapov S. O., Krmela J., Husiev D. M., Verbytskiy A. R., Bocko J. | |
| Heat utilization in boiler plants by using liquid-vapor jet apparatus | G1-G8 |
| DOI: 10.21272/jes.2024.11(2).g1 | |
| |
| Baha V., Pitel J., Pavlenko I. | |
Effect of erosion on surface roughness and hydromechanical characteristics
of abrasive-jet machining | G9-G16 |
| DOI: 10.21272/jes.2024.11(2).g2 | |
| |
| Zivzivadze O., Geguchadze A., Zivzivadze B., Dzadzamia D., Kuparadze A., Sulakvelidze N. | |
An increase in the energy efficiency of vortex micro HPP with a flexible outlet siphon
by self-adjustment of flows in the pressure chamber | G17-G23 |
| DOI: 10.21272/jes.2024.11(2).g3 | |
| |
| Environmental Protection | |
| |
| Aliyu S. A., Salahudeen N., Rasheed A. A. | |
| Adsorptive removal of lead (II) pollutants from wastewater using corncob-activated carbon | H1-H10 |
| DOI: 10.21272/jes.2024.11(2).h1 | |
| |
| Shulga I., Kyzym M., Kotliarov Y., Khaustova V. | |
| Improvement of the ecological efficiency of synthetic motor fuel production in Ukraine | H11-H25 |
| DOI: 10.21272/jes.2024.11(2).h2 | |
