Comprehensive Approach for Identification of Nonlinear Stiffness Characteristics of Bearing Supports for the Oxidizer Turbopump of the Liquid Rocket Engine | Journal of Engineering Sciences

Comprehensive Approach for Identification of Nonlinear Stiffness Characteristics of Bearing Supports for the Oxidizer Turbopump of the Liquid Rocket Engine

Author(s): Pavlenko I.1*, Demyanenko M.1, Edl M.2, Simonovskiy V.1, Pitel’ J.3, Pavlenko V.4, Verbovyi A.1

Affilation(s):
1 Sumy State University, 2 Rymskogo-Korsakova St., Sumy, 40007, Ukraine;
2 University of West Bohemia, 8 Universitni St., 306 14 Pilsen, Czech Republic;
3 Technical University of Košice, 1 Bayerova St., Prešov, 08001, Slovakia;
4 Machine-Building College of Sumy State University, 17 Shevchenka Av., 40022, Sumy, Ukraine

*Corresponding Author’s Address: i.pavlenko@omdm.sumdu.edu.ua

Issue: Volume 5; Issue 2 (2018)

Dates:
Paper received: April 5, 2018
The final version of the paper received: June 25, 2018
Paper accepted online: July 1, 2018

Citation:
Pavlenko I. Comprehensive approach for identification of nonlinear stiffness characteristics of bearing supports for the oxidizer turbopump of the liquid rocket engine / I. Pavlenko, M. Demyanenko, M. Edl, V. Simonovskiy, J. Pitel’, V. Pavlenko, A. Verbovyi // Journal of Engineering Sciences. – Sumy : Sumy State University, 2018. – Volume 5, Issue 2. – P. D6-D14.

DOI: 10.21272/jes.2018.5(2).d2

Research Area: MECHANICAL ENGINEERING: Dynamics and Strength of Machines

Abstract. This article dials with the refinement of the mathematical and computational models of the oxidizer turbopump rotor considering bearing gaps, axial preloading, compliance of the housing parts and the effect of rotation. The loading scheme consists of four substeps is proposed considering preliminary displacement of the outer cage, axial displacement as a result of the support deformation due to the axial preloading force, radial displacement due to the support deformation, as well as centrifugal forces of inertia caused by rotation of the rotor with an inner cage. Modelling of contacts interactions using ANSYS software is carried out according to the appropriate models of contact behaviour. The contact areas between the rolling elements, inner and outer cases are obtained. The contact angle is determined. Isosurfaces of axial and radial displacements for the bearing supports are built. Nonlinear stiffness of bearing supports is determined as the tangent of the angle of inclination for the curve “radial load – radial displacement”. The proposed approach, which used for designing turbopump units for liquid rocket engines, will allow refining the reliable mathematical and computational models of rotor dynamics for turbopump units and providing appropriate computer simulation of forced oscillations of the rotor systems for given permissible residual imbalances considering nonlinear stiffness characteristics of bearing supports.

Keywords: compliance of housing, initial clearance, axial preloading, radial load, contact angle, radial stiffness, axial stiffness.

References:

  1. Pavlenko, I. V., et al. (2018). Investigation of non-linear reactions in rotors’ bearing supports of turbo-pump units for liquid rocket engines. Journal of Engineering Sciences, Vol. 5, Issue 1, pp. D6–D14, DOI: 10.21272/jes.2018.5(1).d2.
  2. Tadzijevas, A., (2015). Dynamics and diagnostics of vertical rotors with nonlinear supports stiffness. Doctoral thesis, Kaunas University of Technology.
  3. Pavlenko, I., Simonovskiy, V., Pitel’, J., & Demianenko, M. (2018). Dynamic analysis of centrifugal machines rotors with combined using 3D and 2D finite element models. Lüdenscheid, RAM-VERLAG.
  4. Sharma, A., Upadhyay, N., & Kunkar, P. K. (2018). Nonlinear dynamic investigations on rolling element bearings: A review. Advances in Mechanical Engineering, Vol. 10(3), pp. 1–15, DOI: 10.1177/1687814018764148.
  5. Pavlenko, I., & Simonovskiy, V. (2015). Computer program “Forced oscillations of the rotor”. Certificate of the authorship, Ukraine, State reg. no. 61788.
  6. Madoliat, R., & Ghanati, M. F. (2013). Theoretical and Experimental Study of Spindle Ball Bearing Nonlinear Stiffness. Journal of Mechanics, Vol. 29, pp. 633–642, DOI: 10.1017/jmech.2013.48.
  7. Pavlenko, I., Trojanowska, J., et al. (2018). Scientific and methodological approach for the identification of mathematical models of mechanical systems by using artificial neural networks. Lecture Notes in Electrical Engineering, Vol. 505, pp. 299–306, DOI: 10.1007/978-3-319-91334-6_41.
  8. Patel, U. K. A., & Upadhyay, S. H. (2014). Nonlinear Dynamic Response of Cylindrical Roller Bearing–Rotor System with 9 Degree of Freedom Model Having a Combined Localized Defect at Inner–Outer Races of Bearing. Tribology Transactions, Vol. 60, Issue 2, pp. 284–299.
  9. Pavlenko, I. V., Simonovskiy, V. I., Pitel, J., et al. (2017). Investigation of critical frequencies of the centrifugal compressor rotor with taking into account stiffness of bearings and seals. Journal of Engineering Sciences, Vol. 4, Issue 1, pp. C1–C6, DOI: 10.21272/jes.2017.4(1).c1.
  10. Jinli, X., Lei, W., & Wenxin, L. (2016). Influence of Bearing Stiffness on the Nonlinear Dynamics of a Shaft-Final Drive Shock and Vibration, Vol. 2016, Article ID 3524609, DOI: 10.1155/2016/3524609.
  11. Martsynkovskyy, V. A., Zahorulko, A. V., et al. (2016). Numerical simulation of rotor dynamics for liquid rocket engines with considering dynamic characteristics of bearings and seals. Sumy, Sumy State University, State reg. no. 0115U000679.

Full Text




Scientific journal "The Journal of Engineering Sciences"
ISSN 2312-2498 (Print), ISSN 2414-9381 (Online).

Faculty of Technical Systems and Energy Efficient Technologies
Sumy State University