Finite Element Analysis of Orthogonal Cutting Forces in Machining AISI 1020 Steel Using a Carbide Tip Tool | Journal of Engineering Sciences

Finite Element Analysis of Orthogonal Cutting Forces in Machining AISI 1020 Steel Using a Carbide Tip Tool

Author(s): Bashistakumar M.1, Pushkal B.2*

Affilation(s):
1 B. R. Ambedkar National Institute of Technology, Grand Trunk Road, Jalandhar, 144011 Punjab, India;
2 L. Narain College of Technology, Kalchuri Nagar, Raisen Road, Bhopal, 462021 Madhya Pradesh, India

*Corresponding Author’s Address: pushkalb06@gmail.com

Issue: Volume 5; Issue 2 (2018)

Dates:
Paper received: February 2, 2018
The final version of the paper received: May 29, 2018
Paper accepted online: June 3, 2018

Citation:
Bashistakumar M. Finite Element Analysis of Orthogonal Cutting Forces in Machining AISI 1020 Steel by Using a Carbide Tip Tool / M. Bashistakumar, B. Pushkal // Journal of Engineering Sciences. – Sumy : Sumy State University, 2018. – Volume 5, Issue 2. – P. A1-A10.

DOI: 10.21272/jes.2018.5(2).a1

Research Area: MANUFACTURING ENGINEERING: Machines and Tools

Abstract. Force modeling in metal cutting is important for various purposes, including thermal analysis, tool life estimation, chatter prediction, and tool condition monitoring. Numerous approaches have been proposed to model metal cutting forces with various degrees of success. In addition to the effect of work piece materials, cutting parameters, and process configurations, cutting tool thermal properties can also contribute to the level of cutting forces. The process of orthogonal metal cutting is studied with the finite element method under plane strain conditions. A numerical procedure has been developed for simulating orthogonal metal cutting using a general-purpose finite element method. The focus of the results presented in this work is on the effect of forces on the tool by variation of cutting parameters. The result is simulated with the analytical value for evolution of effective force for cutting material under various cutting condition.

Keywords: AISI 1020 steel, shaping, analytical model, finite element model, orthogonal cutting.

References:

  1. Ernst, H., & Merchant, M. E. (1941). Chip Formation, Friction and High Quality Machined Surfaces. Trans. Am. Soc. Met., Vol. 29, pp. 299–378.
  2. Lee, E. H., & Shaffer, B. W. (1951). The Theory of Plasticity Applied to a Problem of Machining. J. Appl. Mech., Vol. 18, pp. 405–413.
  3. Zorev, N. N. (1963). Inter-Relationship Between Shear Processes Occurring Along Tool Face and Shear Plane in Metal Cutting. International Research in Production Engineering, ASME, New York, pp. 42–49.
  4. Tay, A. O., Stevenson, M. G., & de Vahl Davis, M. G. (1974). Using the Finite Element Method to Determine Temperature Distributions in Orthogonal Machining. Proceedings of the Institution for Mechanical Engineers, Vol. 188, pp. 627–638.
  5. Usui, E., & Shirakashi, T. (1982). Mechanics of Machining: From Descriptive to Predictive Theory. On the Art of Cutting Metals – 75 Years Later, ASME, New York, PED 7, pp. 13–35.
  6. Oxley, P. L. B. (1989). Mechanics of Machining, an Analytical Approach to Assessing Machinability. Ellis Horwood Ltd.
  7. Özel, T., & Altan, T. (2000). Determination of Workpiece Flow Stress and Friction at the Chip-Tool Contact for High-Speed Cutting. Int. J. Mach. Tools Manuf., Vol. 40/1, pp. 133–152.
  8. Childs, T. H. C. (1998). Material Property Needs in Modeling Metal Machining. Proceedings of the CIRP International Workshop on Modeling of Machining Operations, Atlanta, Georgia, May 19, pp. 193–202.
  9. Jaspers, S. P. F. C., & Dautzenberg, J. H. (2002). Material Behavior in Conditions Similar to Metal Cutting: Flow Stress in the Primary Shear Zone. J. Mater. Process. Technol., Vol. 122, pp. 322–330.
  10. Adibi-Sedeh, A. H., Madhavan, V., & Bahr, B. (2003). Extension of Oxley’s Analysis of Machining to Use Different Material Models. ASME J. Manuf. Sci. Eng., Vol. 125, pp. 656–666.
  11. Davies, M. A., Cao, Q., Cooke, A. L., & Ivester, R. (2003). On the Measurement and Prediction of Temperature Fields in Machining 1045 Steel. CIRP Ann., Vol. 52 (1), pp. 77–80.
  12. Özel, T., & Altan, T. (2000). Process Simulation Using the Finite Element Method: Prediction of Cutting Forces, Tool Stresses and Temperatures in High-Speed Flat End Milling Process. J. Mach. Tools Manuf., Vol. 40/5, pp. 713–738.
  13. Johnson, G. R., & Cook, W. H. (1983). A Constitutive Model and Data for Metals Subjected to Large Strains, High Strain Rates and High Temperatures. Proceedings of the 7th International Symposium on Ballistics, Hague, Netherlands, pp. 541–547.
  14. Zerilli, F. J., & Armstrong, R. W. (1987). Dislocation-Mechanics-Based Constitutive Relations for Material Dynamics Calculations. Appl. Phys., Vol. 61 (5), pp. 1816–1825.
  15. Hamann, J. C., Grolleau, V., & Le Maitre, F. (1996). Machinability Improvement of Steels at High Cutting Speeds – Study of Tool/Work Material Interaction. CIRP Ann., Vol. 45, pp. 87–92.
  16. Lee, W. S., & Lin, C. F. (1998). High-Temperature Deformation Behavior of Ti6AL4V Alloy Evaluated by High Strain-Rate Compression Tests. Mater. Process. Technol., Vol. 75, pp. 127–136.
  17. Meyer Jr, H. W., & Kleponis, D. S. (2001). Modeling the High Strain Rate Behavior of Titanium Undergoing Ballistic Impact and Penetration. J. Impact Eng., Vol. 26, pp. 509–521.
  18. Shatla, M., Kerk, C., & Altan, T. (2001). Process Modeling in Machining. Part I: Determination of Flow Stress Data. J. Mach. Tools Manuf., Vol. 41, pp. 1511–1534.
  19. Tounsi, N., Vincenti, J., Otho, A., & Elbestawi, M. A. (2002). From the Basic Mechanics of Orthogonal Metal Cutting toward the Identification of the Constitutive Equation. J. Mach. Tools Manuf., Vol. 42, pp. 1373–1383.
  20. Adibi-Sedeh, A. H., & Madhavan, V. (2002). Effect of Some Modifications to Oxley’s Machining Theory and the Applicability of Different Material Models. Sci. Technol., Vol. 6 (3), pp. 379–395.
  21. Lee, L. C., Liu, X., & Lam, K. Y. (1995). Determination of Rake Stress Distribution in Orthogonal Machining. J. Mach. Tools Manuf., Vol. 35 (3), pp. 373–382.
  22. Huang, Y., & Liang, S. Y. (2003). Cutting Forces Modeling Considering the Effect of Tool Thermal Property-Application to CBN Hard Turning. J. Mach. Tools Manuf., Vol. 43, pp. 307–315.
  23. Moufki, A., Devillez, A., Dudzinski, D., & Molinari, A. (2004). Thermomechanical modelling of oblique cutting and experimental validation. International Journal of Machine Tools and Manufacture, No. 44:971.
  24. Molinari, A., & Moufki, A. (2005). A new thermomechanical model of cutting applied to turning operations. Part Theory. International Journal of Machine Tools and Manufacture, Paper no. 45:166.
  25. Moufki, A., & Molinari, A. (2005). A new thermomechanical model of cutting applied to turning operations. Part II. Parametric study. International Journal of Machine Tools and Manufacture, Paper no. 45:181.
  26. Fang, G., & Zeng, P. (2005). Three-dimensional thermo–elastic–plastic coupled FEM simulations for metal orthogonal cutting processes. Journal of Materials Processing Technology, Paper no. 168:42.
  27. Zou, G. P., Yellowley, , & Seethaler, R. J. (2009). A new approach to the modeling of orthogonal cutting processes. International Journal of Machine Tools and Manufacture, Paper no. 49:701.
  28. Lazoglu, , & Islam, C. (2012). Modeling of 3D temperature fields for oblique machining. CIRP Annals – Manufacturing Technology, Paper no. 61:127.
  29. Li, R., & Shih, A. J. (2006). Finite element modeling of 3D turning of titanium. The International Journal of Advanced Manufacturing Technology, Paper no. 29:253.
  30. Llanos, I., Villar, J. A., Urresti, , & Arrazola, P. J. (2009). Finite element modeling of oblique machining using an arbitrary Lagrangian–Eulerian formulation. Machining Science and Technology, Paper no. 13:385.

Full Text




Scientific journal "The Journal of Engineering Sciences"
ISSN 2312-2498 (Print), ISSN 2414-9381 (Online).

Faculty of Technical Systems and Energy Efficient Technologies
Sumy State University