Investigation on the Rheological Properties of Polydimethylsiloxane | Journal of Engineering Sciences

Investigation on the Rheological Properties of Polydimethylsiloxane

Author(s): Javanbakht T.

Affiliation(s): Department of Chemistry and Biochemistry, Department of Physics, Concordia University, Richard J. Renaud Science Complex, 714,1 Sherbrooke St. West, H4B 1R6, Montreal, Quebec, Canada

*Corresponding Author’s Address: [email protected]

Issue: Volume 9, Issue 1 (2022)

Dates:
Submitted: January 20, 2022
Accepted for publication: March 18, 2022
Available online: March 23, 2022

Citation:
Javanbakht T. (2022). Investigation on the rheological properties of polydimethylsiloxane. Journal of Engineering Sciences, Vol. 9(1), pp. C1-C7, doi: 10.21272/jes.2022.9(1).c1

DOI: 10.21272/jes.2022.9(1).c1

Research Area:  MANUFACTURING ENGINEERING: Materials Science

Abstract. This paper focuses on studying the rheological properties of polydimethylsiloxane (PDMS). This polymer has been used to fabricate membranes and filters in engineering. The analysis of the rheological properties of this polymer is required for a further investigation of its mechanical behavior. In this study, the rheological behavior of PDMS is reported at different temperatures. This polymer showed steady shear viscosity during a short duration. However, this behavior changed with time and increased more with increasing temperature. The impact of the temperature increase was also observed when the shear viscosity of PDMS increased with shear strain. The increase of torque with shear strain and time was observed at different temperatures. Shear stress increased linearly with the shear rate at 20 °C and 40 °C. As expected, the deformation of the polymer required less shear stress with the increase of temperature. However, the change of shear stress with the shear rate at 60 °C was not linear, and the slope of the curve increased more at high shear rates. The results of this investigation can provide the required information for a better fabrication of membranes and filters with this polymer.

Keywords: rheology, polymer, mechanical properties, materials science, industrial growth.

References:

  1. Velkov, A. (2013). Polydimethylsiloxane (PDMS), Springer-Verlag Berlin Heidelberg, E. Droli, L. Giorno (eds.), Encyclopedia of Membranes, pp. 1–2. https://doi.org/10.1007/978-3-642-40872-4_1400-1.
  2. Mark, J.E. (2009). Polymer Data Handbook, 2nd edn., Oxford University Press, Oxford.
  3. Zielecka, M., Rabajczyk, A., Pastuszka, L., Jurecki, L. (2020). Flame resistant silicone-containing coating materials, Coatings, Vol. 10, 479. https://doi.org/10.3390/coatings10050479.
  4. Dvornic, P.R. (2000). Thermal Properties of Polysiloxanes in Silicon-Containing Polymers: The science and technology of their Synthesis and Applications, Jones, R.G., Ando., W., Chojnowski, J., Eds.; Springer: Dordrecht, The Netherlands, pp. 185–213.
  5. Dobkowski, Z., Zielecka, M. (2002). Thermal analysis of the poly(siloxane)-poly(tetrafluoroethylene) coating system, J. Therm. Anal. Calorim., Vol. 68, 147–158. https://doi.org/10.1023/A:1014937004491.
  6. Tiwari, A., Nema, A.K., das, C.K., Nema, S.K. (2004). Thermal analysis of polysiloxanes, aromatic polyimide and their blends, Thermochimica Acta, Vol. 417(1), 133–142. https://doi.org/10.1016/j.tca.2003.10.003.
  7. Hamdani, S., Longuet, C., Perrin, D., Lopez-cuesta, J.M., Ganachaud, F. (2009). Flame retardancy of silicone-based materials, Polym. Degrad. Stabil., Vol. 94, 465–495. https://doi.org/10.1016/j.polymdegradstab.2008.11.019.
  8. Kwan, M., Braccini, M., Lane, M.W., Ramanath, G. (2018). Frequency-tunable toughening in a polymer-metal-ceramic stack using an interfacial molecular nanolayer, Nature Communications, Vol. 9, 5249. https://doi.org/10.1038/s41467-018-07614-y.
  9. Zielecka, M., Bujnowska, E. (2006). Silicone-containing polymer matrices as protective coatings. Properties and applications. Prog. Org. Coat., Vol. 55, 160–167. https://doi.org/10.1016/j.porgcoat.2005.09.012.
  10. Dvornic, P.R. (2004). High Temperature Stability of Polysiloxanes in Silicon Compounds: Silanes and Silicones, Gelest Catalog, Gelest, Inc.: Morrisville, PA, USA, pp. 419–432.
  11. Grassie, N., Macfarlane, I.G. (1978). The thermal degradation of polysiloxanes–I. Poly(dimethylsiloxane). Eur. Polym. J., Vol. 14, 875–884. https://doi.org/10.1016/0014-3057(78)90084-8.
  12. Jovanovic, J.D., Govedarica, M.N., Dvornic, P.R., Popovic, I.G. (1998). The thermogravimetric analysis of some polysiloxanes. Polym. Degrad. Stabil., Vol. 61, 87–93. https://doi.org/10.1016/S0141-3910(97)00135-3.
  13. Deshpande, G., Rezac, M.E. (2001). The effect of phenyl content on the degradation of poly(dimethyl diphenyl) siloxane copolymers. Polym. Degrad. Stabil., Vol. 74, 363–370. https://doi.org/10.1016/S0141-3910(01)00186-0.
  14. 14.   Zelisko, P.M., Amelien, K., Frampton, M. (2008). Enzyme-mediated cross-linking of silicone polymers, US Patent WO2008154731A1.
  15. Rambarran, T., Gonzaga, F., Brook, M.A. (2012). Generic, metal-free crosslinking and modification of silicone elastomers using click ligation, Macromolecules, Vol. 45(5), 2276–2285. https://doi.org/10.1021/ma202785x.
  16. 16.   Springael, S., Wolf, A.T.F. Stammer, A. (2005). Room temperature vulcanizable (RTV) silicone compositions having improved body, UK Patent GB2413332A.
  17. Pan, K., Zeng, X., Li, H., Lai, X. (2016). Synthesis of silane oligomers containing vinyl and epoxy group for improving the adhesion of addition-cure silicone encapsulant, Journal of Adhesion Science and Technology, Vol. 30(10), pp. 1–12. https://doi.org/10.1080/01694243.2016.1142806.
  18. 18.   Liu, J., Yao, Y., Chen, S., Li, X., Zhang, Z. (2021). A new nanoparticle-reinforced silicone rubber composite integrating high strength and strong adhesion, Composites Part A: Applied Science and Manufacturing, Vol. 151, 106645. https://doi.org/10.1016/j.compositesa.2021.106645.
  19. Gordy, T.A., Ung, N.S., Fritz, U., Fritz, O., Wojcik, R. (2008). Compositions and devices comprising silicone and specific polyphosphazenes, US Patent 0095816 A1.
  20. Muramoto, N., Matsuno, T., Wada, H., Kuroda, k., Shimojima, A. (2021). Preparation of an ordered nanoporous silicone-based material using silica colloidal crystals as a hard template, Chem. Lett., Vol. 50, pp. 1038–1040. https://doi.org/10.1246/cl.210046.
  21. Nahmias, Y., Bhatia, S.N. (2009). Microdevices in biology and medicine, Artech House, Norwood.
  22. Ratner B.D., Hoffman A.S., Schoen F.J., Lemons J.E. (1996). Biomaterials science: an introduction to materials in medicine, Elsevier Science, Amsterdam.
  23. Kim, T., Kim. H. (2020). Effect of acid-treated carbon nanotube and amine-terminated polydimethylsiloxane on the rheological properties of polydimethylsiloxane/carbon nanotube composite system, The Korea-Australia Rheology Journal, Vol. 22(3), 205–210.
  24. Deshpande, T.D., Singh, Y.R.G., Patil, S., Joshi, Y.M., Sharma, A. (2019). Adhesion strength and viscoelastic properties of polydimethylsiloxane (PDMS) based elastomeric nanocomposites with embedded electrospun nanofibers, Soft Matther, Vol. 15, 5739–5747. https://doi.org/10.1039/C9SM00533A.
  25. Seshadri, I., Borca-Tasciuc, T., Keblinski, P., Ramanath, G. (2013). Interfacial thermal conductance-rheology nexus in metal-contacted nanocomposites, Applied Physics Letters, Vol. 103(17), 173113. https://doi.org/10.1063/1.4824702.
  26. Javanbakht, T., David, E. (2020). Rheological and physical properties of a nanocomposite of graphene oxide nanoribbons with polyvinyl alcohol. Journal of Thermoplastic Composite Matererials, 0892705720912767. https://doi.org/10.1177/0892705720912767.
  27. Javanbakht, T., Laurent, S., Stanicki, D., David, E. (2019). Related physicochemical, rheological, and dielectric properties of nanocomposites of superparamagnetic iron oxide nanoparticles with polyethyleneglycol. Journal of Applied Polymer Science, Vol. 137(3), pp. 48280–48289. https://doi.org/10.1002/app.48280.
  28. Javanbakht, T. (2021). Comparative study of rheological properties of polyvinyl alcohol and polyethylene glycol, Journal of Engineering Sciences, Vol. 8(2), pp. F11–F19. https://doi.org/10.21272/jes.2021.8(2).f3.
  29. Kumara, P., Prakash, S.C., Lokesh, P., Manral, K. (2015). Viscoelastic properties and rheological characterization of carbomers, International Journal of Latest Research in Engineering and Technolog, Vol. 1(6), 17–30.
  30. Javanbakht, T., Laurent, S., Stanicki, D., Salzmann, I. (2021). Rheological properties of superparamagnetic iron oxide nanoparticles, Journal of Engineering Sciences, Vol. 8(1), pp. C29–C37. https://doi.org/10.21272/jes.2021.8(1).c4.
  31. Javanbakht, T., Laurent, S., Stanicki, D., Frenette, M. (2020). Correlation between physicochemical properties of superparamagnetic iron oxide nanoparticles and their reactivity with hydrogen peroxide. Canadian Journal of Chemistry, Vol. 98(10), pp. 601–608. https://doi.org/10.1139/cjc-2020-0087.
  32. Javanbakht, T., Bérard, A., Tavares, J. R. (2016). Polyethylene glycol and poly (vinyl alcohol) hydrogels treated with photo-initiated chemical vapor deposition. Canadian Journal of Chemistry, Vol. 94(9), pp. 744–750. https://doi.org/10.1139/cjc-2016-0229.
  33. Varga, N., Turcsányi, A., Hornok, V., Csapó, E. (2019). Vitamin E-loaded PLA- and PLGA-based core-shell nanoparticles: Synthesis, structure optimization and controlled drug release, pharmaceutics, Vol. 11(7), 357. https://doi.org/10.3390/pharmaceutics11070357.
  34. Tafulo, P.A.R., Queirós, R.E., González-Aguilar, G. (2009). On the “concentration-driven” methylene blue dimerization, Spectrochimica Acta Part A, Vol. 73, pp. 295–300. doi:10.1016/j.saa.2009.02.033.
  35. Khoroshavina, Y.V. (2016). Properties of polyphenylsilsesquioxane-polydimethylsiloxane block copolymer and its filled vulcanizates, Materials Chemistry and Physics, Vol. 2(1), pp. 28–32.
  36. Sales, F.C.P., Souza, A., Ariati, R., Noronha, V. (2021). Composite material of PDMS with interchangeable transmittance: Study of optical, mechanical properties and wettability, Journal of Composites Science, Vol. 5(4), 110. https://doi.org/10.3390/jcs5040110.
  37. Heris, H., Khavari, A., Ehrlicher, A.J. (2016). Tunable viscoelastic polydimethylsiloxane substrates for cell mechanics and mechanobiology applications, 10th World Biomaterials Congress, Montreal, Canada. doi: 10.3389/conf.FBIOE.2016.01.02958.
  38. Han, X., Du, W., Li, Y., Li, Z., Li, L. (2015). Modulating stability and mechanical properties of silica–gelatin hybrid by incorporating epoxy-terminated polydimethylsiloxane oligomer, Journal of Applied Polymer Science, Vol. 133(8). https://doi.org/10.1002/app.43059.
  39. Warunek, S.P., Sorenson, S.E., Cunat, J.J., Green, L.J. (1989). Physical and mechanical properties of elastomers in orthodontic positioners, Americal Journal of Orthodontics and Dentofacial Orthopedics, Vol. 95, 5, pp. 388–400. https://doi.org/10.1016/0889-5406(89)90300-4.
  40. Rodriguez, N., Ruelas, S., Forien, J.-B., Dudukovic, N., DeOtte, J., Rodriguez, J., Moran, B., Lewicki, J.P., Duoss, E.B., Oakdale, J.S. (2021). 3D printing of high viscosity reinforced silicone elastomers, Polymers, Vol. 13(14), 2239. https://doi.org/10.3390/polym13142239.
  41. (2016). Absorbance analysis of Escherichia coli (E. coli) bacteria suspension in polydimethylsiloxane (PDMS)-glass based microfluidic, Advanced Materials Research, Ed. K. Noorsal, Vol. 1133, pp. 65–69. https://doi.org/10.4028/www.scientific.net/AMR.1133.65.
  42. Andrady, A.L., Llorente, M.A., Mark, J.E. (1992). Effects of dangling chains on some dynamic mechanical properties of model poly(dimethylsiloxane) networks, Polymer Bulletin, Vol. 28(1), pp. 103–108. https://doi.org/10.1007/BF01045645.
  43. 43.   Pourian Azar, N.T., Mutlu, P., Khodadust, R., Gunduz, U. (2013). Poly(amidoamine) (PAMAM) Nanoparticles: Synthesis and Biomedical Applications, J. Biol. & Chem., Vol. 41 (3), pp. 289–299.
  44. Javanbakht, T., Hadian, H., Wilkinson, K. J. (2020). Comparative study of physicochemical properties and antibiofilm activity of graphene oxide nanoribbons. Journal of Engineering Sciences, Vol. 7(1), pp. C1–C8. https://doi.org/10.21272/jes.2020.7(1).c1.
  45. Javanbakht, T., Ghane-Motlah, B., Sawan, M. (2020). Comparative study of antibiofilm activity and physicochemical properties of microelectrode arrays. Microelectronic Engineering, Vol. 229, 111305. https://doi.org/10.1016/j.mee.2020.111305.
  46. Ghane-Motlagh, B., Javanbakht, T., Shoghi, F., Wilkinson, K. J., Martel, R., Sawan, M. (2016). Physicochemical properties of peptide-coated microelectrode arrays and their in vitro effects on neuroblast cells. Materials Science and Engineering C, Vol. 68, pp. 642–650. https://doi.org/10.1016/j.msec.2016.06.045.
  47. Elmowafy, E.M., Tiboni, M., Soliman, M.E. (2019). Biocompatibility, biodegradation and biomedical applications of poly(lactic acid)/poly(lactic-co-glycolic acid) micro and nanoparticles, Journal of Pharmaceutical Investigation, Vol. 49, pp. 347–380. https://doi.org/10.1007/s40005-019-00439-x.
  48. 48.   Kharwade, R., More, S., Warokar, A., Agrawal, P., Mahajan, N. (2020). Starburst pamam dendrimers: Synthetic approaches, surface modifications, and biomedical applications, Arabian Journal of Chemistry, Vol. 13(7), 6009–6039. https://doi.org/10.1016/j.arabjc.2020.05.002.
  49. Djavanbakht, T., Carrier, V., André, J. -M., Barchewitz, R., Troussel, P. (2000). Effets d’un chauffage thermique sur les performances de miroirs multicouches Mo/Si, Mo/C et Ni/C pour le rayonnement X mou. Journal de Physique IV France, Vol. 10, pp. 281–287. https://doi.org/10.1051/jp4:20001031.
  50. Javanbakht, T., Sokolowski, W. (2015). Thiol-ene/acrylate systems for biomedical shape-memory polymers in Shape Memory Polymers for Biomedical Applications (Ed. L’H Yahia), pp. 157–166, Sawston, Cambridge, Woodhead Publishing. https://doi.org/10.1016/B978-0-85709-698-2.00008-8.
  51. Djavanbakht, T., Jolès, B., Laigle, A. (2000). Intracellular stability of antisense oligonucleotides protected by the d(GCGAAGC). Biomedical Society Transactions, Vol. 28, p. A201. https://doi.org/10.1042/bst028a201c.
  52. Van Oosten, A.S.G., Vahabi, M., Licup, A.J., Sharma, A., Galie, P.A., MacKintosh, F.C., Janmey, P.A. (2016). Uncoupling shear and uniaxial elastic moduli of semiflexible biopolymer networks: compression-softening and stretch-stiffening, Sci Rep., Vol. 6, 19270. https://doi.org/10.1038/srep19270.
  53. Wilkes, G.L. (1981). An overview of the basic rheological behavior of polymer fluids with an emphasis on polymer melts, Journal of Chemical Education, Vol. 58(11), pp. 880–892. https://doi.org/10.1021/ed058p880.
  54. Liu, F., Wang, B., Xing, Y., Zhang, K., Jiang, W. (2020). Effect of polyvinyl alcohol on the rheological properties of cement mortar, Molecules, Vol. 25, 754. http://doir.org/10.3390/molecules25030754.
  55. Kim, J.H., Robertson, R.E., Naaman, A.E. (1999). Structure and properties of poly(vinyl alcohol)- modified mortar and concrete. Cement and Concrete Research, Vol. 29(3), pp. 407–415. https://doi.org/10.1016/S0008-8846(98)00246-4.
  56. Kim, J.H., Robertson, R.E. (1997). Prevention of air void formation in polymer-modified cement mortar by pre-wetting, Cement and Concrete Research, Vol. 27, pp. 171–176. https://doi.org/10.1016/S0008-8846(97)00001-X.
  57. Allahverdi, A., Kianpur, K., Moghbeli, M.R. (2010). Effect of polyvinyl alcohol on flexural strength and some important physical properties of Portland cement paste. Iran. J. Mater. Sci. Eng., 7, pp. 1–6.
  58. Remiš, T. (2017). Rheological properties of poly(vinyl alcohol) (PVA) derived composite membranes for fuel cells, J. Phys.: Conf. Ser., Vol. 790, 012027. https://doi.org/10.1088/1742-6596/790/1/012027.
  59. Krasinskyi, V., Suberlyak, O., Antonuk, V., Jachowicz, T. (2017). Rheological properties of compositions based on modified polyvinyl alcohol, Adv. Sci. Technol. Res. J., Vol. 11(3), pp. 304–309. https://doi.org/10.12913/22998624/76584.
  60. Bai, H., Sun, Y., Xu, J., Dong, W., Liu, X. (2015). Rheological and structural characterization of HA/PVA-SbQ composites film-forming solutions and resulting films as affected by UV irradiation time, Carbohydr. Polym., Vol. 115, pp. 422–31. http://doi.org/10.1016/j.carbpol.2014.08.103.
  61. Smith, A.T., LaChance, A.M., Zeng, S., Liu, B., Sun, L. (2019). Synthesis, properties, and applications of graphene oxide/reduced graphene oxide and their nanocomposites, Nano Materials Science, Vol. 1(1), pp. 31–47. https://doi.org/10.1016/j.nanoms.2019.02.004.
  62. Meree, C.E., Schueneman, G.T., Meredith, J.C., Shofner, M.L. (2016). Rheological behavior of highly loaded cellulose nanocrystal/poly(vinyl alcohol) composite suspensions, Cellulose, Vol. 23(5), pp. 3001–3012. https://doi.org/10.1007/s10570-016-1003-1.
  63. Salahshoori, I., Nasirian, D., Rashidi, N., Hossain, K., Hatami, A., Hassanzadeganroodsari, M. (2021). The effect of silica nanoparticles on polysulfone–polyethylene glycol (PSF/PEG) composite membrane on gas separation and rheological properties of nanocomposites, Polymer Bulletin, Vol. 78, pp. 3227–3258. https://doi.org/10.1007/s00289-020-03255-8.
  64. Heo, J., Tanum J., Park, S., Choi, D., Jeong, H., Han, U., Hong, J. (2020). Controlling physicochemical properties of graphene oxide for efficient cellular delivery, Journal of Industrial and Engineering Chemistry, Vol. 88, pp. 312–318. https://doi.org/10.1016/j.jiec.2020.04.030.
  65. Faccini, M., Borja, G., Boerrigter, M., Martín, D.M. Crespiera, S.M., Vázquez-Campos, S., Aubouy, L., Amantia, D. (2015). Fabrication and applications of electrospun nanofibers, Journal of Nanomaterials, Vol, 2015. 247471. https://doi.org/10.1155/2015/247471.
  66. 66.   Yan, J., Xiao, W., Chen, L., Wu, Z., gao, J., Xue, H. (2021). Superhydrophilic carbon nanofiber membrane with a hierarchically macro/meso porous structure for high performance solar steam generators, Desalination, Vol. 516, 115224. https://doi.org/10.1016/j.desal.2021.115224.
  67. Huang, Y., Zhang, L., Lu, H., Lai, F., Miao, Y.-E., Liu, T. (2016). A highly flexible and conductive graphene-wrapped carbon nanofiber membrane for high-performance electrocatalytic applications, Inorganic Chemistry Frontiers, Vol. 3(7), 969–976. https://doi.org/10.1039/C6QI00101G.
  68. Pellegrino, J., Schulte, L.R., De la Cruz, J., Stoldt, C. (2017). Membrane processes in nanoparticle production, Journal of Membrane Science, Vol. 522, pp. 245–256. https://doi.org/10.1016/j.memsci.2016.09.018.
  69. Rashed, A.R.,Merenda, A., Kondo, T., Lima, M., Razal, J., Kong, L., Huynh, C., Dumée, L.F. (2021). Carbon nanotube membranes – Strategies and challenges towards scalable manufacturing and practical separation applications, Separation and Purification Technology, Vol. 257, 117929. https://doi.org/10.1016/j.seppur.2020.117929.
  70. Sianipar, M., Kim, S.H., Khoiruddin, Iskandar, F., Wenten, I.G. (2017). Functionalized carbon nanotube (CNT) membrane: progress and challenges, RSC Advances, Vol. 7(81), pp. 51175–51198. https://doi.org/10.1039/C7RA08570B.
  71. Rasid, H.-O., Ralph, S.F. (2017). Carbon Nanotube Membranes: Synthesis, Properties, and Future Filtration Applications, Nanomaterials, 7(5), 99. https://doi.org/10.3390/nano7050099.
  72. Wang, Z., Wang, Z., Lin, S., Jin, H., Gao, S., Zhu, Y. Jin, J. (2018). Nanoparticle-templated nanofiltration membranes for ultrahigh performance desalination, Nature Communications, Vol. 9, 2004. https://doi.org/10.1038/s41467-018-04467-3.
  73. 73.   Sun, C. (2009). Poly(vinylidene fluoride) membranes: Preparation, modification, characterization and applications, PhD Thesis, University of Waterloo, Canada.
  74. Yee, R.S.L., Zhang, K., Ladewig, B.P. (2013). The effects of sulfonated poly(ether ether ketone) ion exchange preparation conditions on membrane properties, Membranes, Vol. 3, pp. 182–195. https://doi.org/10.3390/membranes3030182.
  75. Kausar, A. (2020). Polydimethylsiloxane-based nanocomposite: present research scenario and emergent future trends, Polymer-Plastic Technology and Materials, Vol. 59, 11, pp. 1148–1166. https://doi.org/10.1080/25740881.2020.1719149.
  76. Liu, Y., Wang, C., Jarrell, R.M., Nair, S., Wynne, K.J., Di, D. (2020). Icephobic, Pt-Cured, Polydimethylsiloxane Nanocomposite Coatings, ACS Appl. Mater. Interfaces, Vol. 12(9), pp. 11180–11189. https://doi.org/10.1021/acsami.9b20989.
  77. Flores, J.M.B., Garcia, M.G.P., Contreras, G.G., Mendoza, A.C., Arellano, V.H.R. (2021). Polydimethylsiloxane nanocomposite macroporous films prepared via Pickering high internal phase emulsions as effective dielectrics for enhancing the performance of triboelectric nanogenerators, ACS Advances, Vol. 11(1), pp. 416–424. https://doi.org/10.1039/D0RA07934K.

Full Text




© 2014-2024 Sumy State University
"Journal of Engineering Sciences"
ISSN 2312-2498 (Print), ISSN 2414-9381 (Online).
All rights are reserved by SumDU