Volume 5(2), 2018


Machines and Tools A
Bashistakumar M., Pushkal B.
Finite Element Analysis of Orthogonal Cutting Forces
in Machining AISI 1020 Steel Using a Carbide Tip Tool
A 1-A 10
doi: 10.21272/jes.2018.5(2).a1
Technical Regulations and Metrological Support B
Zaloga V. O., Yashyna T. V., Dynnyk O. D.
Analysis of the Theories for Assessment
of the Quality Management Product Efficiency
B 1-B 6
doi: 10.21272/jes.2018.5(2).b1
Materials Science C
Molchanov L. S., Synehin Y. V., Lantukh O. S., Ryshkova I. S.
Research of Non-metallic Inclusions Removal
in Teeming Ladles of Various Design
C 1-C 4
doi: 10.21272/jes.2018.5(2).c1
Dynamics and Strength of Machines  D
Ike C. C.
Systematic Presentation of Ritz Variational Method
for the Flexural Analysis of Simply Supported
Rectangular Kirchhoff–Love Plates
D 1-D 5
doi: 10.21272/jes.2018.5(2).d1
Pavlenko I., Demyanenko M., Edl M., Simonovskiy V.,
Pitel’ J., Pavlenko V., Verbovyi A.
Comprehensive Approach for Identification of Nonlinear Stiffness
Characteristics of Bearing Supports for the Oxidizer Turbopump
of the Liquid Rocket Engine
D 6-D 14
doi: 10.21272/jes.2018.5(2).d2
Aravindaraj E., Natrayan L., Santhosh M. S., Kumar M. S.
Design and Analysis of Connecting Tie Rod Assembly
for Automotive Application
D 15-D 20
doi: 10.21272/jes.2018.5(2).d3
Computational Mechanics E
Emovon I., Nwaoha T. C.
Application of Rough TOPSIS Technique for the Analysis
of Engineering System Failure Causes
E 1-E 6
doi: 10.21272/jes.2018.5(2).e1
Al Salaimeh S.
Development of the Computer Graphics Management System
Using Text of Natural Language
E 7-E 9
doi: 10.21272/jes.2018.5(2).e2
Mukhoid O. V., Kostornoi O.S., Shyfrin D. M.
Selection of the Optimal Software for Designing Expert Systems E 10-E 15
doi: 10.21272/jes.2018.5(2).e3
Altaf S., Mehmood M. S., Imran M.
Implementation of Efficient Artificial Neural Network 
Data Fusion Classification Technique for Induction 
Motor Fault Detection
E 16-E 21
doi: 10.21272/jes.2018.5(2).e4
Ganesh E. N.
Kalman Filter Based Controlled Online System Identification E 22-E 26
doi: 10.21272/jes.2018.5(2).e5
Skrynkovskyy R. M., Yuzevych L. V., Ogirko O. I., Pawlowski G.
Big Data Approach Application for Steel Pipelines
in the Conditions of Corrosion Fatigue
E 27-E 32
doi: 10.21272/jes.2018.5(2).e6
Processes in Machines and Devices F
Serdiuk V. O., Sklavbinskyi V. I., Bolshanina S. B.,
Ivchenko V. D., Qasim M. N., Zaytseva K. O.
Membrane Processes during the Regeneration
of Galvanic Solution
F 1-F 6
doi: 10.21272/jes.2018.5(2).f1
Arseniev V. M., Shulumei A. V.
Numerical Simulation of the Evaporative Air Cooler
with a Capillary-Porous Structure
F 7-F 12
doi: 10.21272/jes.2018.5(2).f2
Liaposhchenko O., Khukhryanskiy О., Moiseev V.,
Ochowiak M., Manoilo Е.
Intensification of Foam Layered Apparatus by Foam Stabilization F 13-F 18
doi: 10.21272/jes.2018.5(2).f3
Plyatsuk L. D., Ablieieva I. Yu., Vaskin R. A., Yeskendirov M., Hurets L. L.
Mathematical Modeling of Gas-Cleaning Equipment
with a Highly Developed Phase Contact Surface
F 19-F 24
doi: 10.21272/jes.2018.5(2).f4
Advanced Energy Efficient Technologies G
Samuel O. D., Emovon I., Idubor F. I., Adekomaya O.
Characterization and Degradation of Viton Fuel Hose Exposed
to Blended Diesel and Waste Cooking Oil Biodiesel
G 1-G 8
doi: 10.21272/jes.2018.5(2).g1
Environmental Protection H
Buts Yu. V.
Features of Geochemical Migration of Chemical Elements
after Technogenic Loading of Pyrogenic Nature
H 1-H 4
doi: 10.21272/jes.2018.5(2).h1
Som U.,  Rahman F., Hossain S.
Recovery of Pyrolytic Oil from Thermal Pyrolysis of Medical Waste H 5-H 8
doi: 10.21272/jes.2018.5(2).h2
Plyatsuk L. D., Gabassova S. M., Ablieieva I. Yu., Mamutova A.
Analysis of Technogenic Load of Oil and Gas Production
on Caspian Region
H 9-H 17
doi: 10.21272/jes.2018.5(2).h3

Recommended for publication by the Academic Council of Sumy State University (Minutes No. 6 of 15.11.2018).
Print date: December 1, 2018.